Overall, pleased with the purchase. Things started out a little rocky but are going smother as I figure things out. First, while I was very impressed that Miles Runner included a pump, I couldn't get it to work on any of my 12v accessory power outlets in my vehicles. I ended up buying an outlet that attaches directly to the battery for about 12 bucks. After that, install was pretty easy. I have since bought a SUP pump adapter that will work with my portable Ryobi inflator. Problem solved. My other issue was while towing my travel trailer. I don't know exactly what going on between it and the truck but the rear bar kept popping out at 65mph. It doesn't happen when I am not towing??? Anyway, I ended up zip tying the bar in place. That problem solved too. The top seems well sealed and stays in place. Seriously surprised by the lack of movement at highway speeds. Fit and finish are good. I do have one spot about the length of my pinky nail where I watching a side seam. It looks like little glue may be missing. So far, it hasn't grown. I'll likely glue myself and forget about it. The exterior looks good and I absolutely love the interior. The loops and windows were well thought out imo. It worked great for storage and I am now building it out for some overnight trips that are simply too short to mess with a RV. Hoping for years of trouble free use.Edit: Holding up fine and we're living the 'ruff' life.
The Installation Revolution:
Why a Clamp Rail System Beats Tie-Downs
The mounting system is the foundation of a topper's performance. A loose topper is a safety hazard at speed and a failure point on rough terrain.
Clamp Rail System
Lightweight Durability
The Ultimate Answer on Sealing:
Integrated Seal vs. "Rain Skirt"
Sealing, especially against dust and mud, is the lifeline of overlanding life. Your gear needs a dry, clean environment.
- The Industry Shortcut & Its Flaw ("The Rain Skirt")
Many first-generation inflatable truck caps have inherent design flaws at the tailgate and sidewall interfaces. A common solution is a "rain skirt"—a separate piece of material that drapes between the topper and tailgate to manage water. This is a passive, clumsy, and limited fix. Water can still seep through gaps, and it does nothing to stop dust and fine dirt—a critical failure for overlanding. - The MilesRunner Engineering Answer: Compression Seal Rail
Our sealing isn't an afterthought; it's designed in synergy with our mounting system. Integrated into the aluminum rail is a high-density, weather-resistant silicone or EPDM gasket.
- How It Works: When you close your tailgate, it actively compresses this gasket, creating a consistent, uniform, full-perimeter pressure seal.
- The Core Advantage: This mechanical compression seal provides security akin to a hard truck topper. It effectively blocks water and, crucially, seals out dust and mud, a feat the "rain skirt" cannot accomplish. For travelers crossing deserts or dusty Baja trails, this is a non-negotiable feature.
- Absolute Security.
The mechanical lock of the clamps provides peace of mind that tie-downs cannot, eliminating worries about movement at highway speeds or on off-road trails. - Even Force Distribution.
The rail turns a few fixed "points" into a secure "line," distributing pressure evenly and preventing wear or tear on the topper material from localized stress. - Installation Ease.
Once the rail system is installed, inflating, deflating, and removing the topper itself is incredibly fast, with no need to readjust multiple cumbersome straps. - The Weakness of Tradition: Reliance on Tie-Downs
Most soft toppers and other inflatable truck bed covers use nylon straps and plastic buckles to secure the material directly to the bed rails. This is a passive fixation method. Straps can stretch, wear, and loosen under constant vibration, causing the topper to shift against the truck. This is the primary cause of leaks and instability. - The MilesRunner Solution: Integrated Rails & Hardened Steel Clamps
Our system features a continuous aluminum rail that is integrated into the topper's structure. This rail is locked onto your truck's bed rails using multiple high-strength, anti-corrosion hardened steel clamps.
A Design Philosophy Forged for Overlanding
Overlanding isn't just driving; it's about comfort and reliability in harsh environments. Every detail of the MilesRunner is designed for this purpose:
- Lightweight & Compact Storage: Deflated, the topper packs into a single bag, freeing up crucial bed space for recovery gear and other equipment—something a hard topper can never do.
- Rapid Deployment: After a long day on the trail, you can inflate a secure, dry shelter in minutes, without wrestling with a complex hard shell or soft top frame.
- Total Protection: Our goal isn't just rain resistance; it's to create a truly habitable environment, sealed against wind, rain, dust, and mud to protect your sleep system and valuable cargo.
Shop this Build
